The Wirtgen WR 2000 XL stabilizer/recycler is an updated model of the WR 2000. The WR 2000 XL adapts to North American requirements with an industry standard 8-ft.-wide drum (instead of 6-ft., 7-in. on the WR 2000), and has heavy duty 25MM cutter teeth. This unit also eliminates the cab found on the existing WR 2000.

The all-new WR 2000 XL is a state-of-the-art, 400 hp-class stabilizer/reclaimer which gives heavy contractors and roadbuilders a high-performance alternative to the larger, WR 2400 at 563 HP and the industry-standard, 670-hp WR 2500 S from Wirtgen.

In addition to dry stabilization, it stabilizes with emulsions, and can be equipped with a high capacity water pump for dry soil conditions, or cement or lime stabilization projects. These proven systems have been used on the larger WR 2500/WR 2500 S stabilizer/recyclers for years, and the WR 2000 XL incorporates 40 percent parts in common with its "big brothers".

The unique cutter system is a floating hood design with a hardened steel housing, with multiple wear plate inserts to minimize wear. The cutter drum has bolt-on end rings which are easy to service.

Material size is controlled by use of a hydraulically adjustable, manganese-lined breaker bars that can be remotely adjusted by the machine operator to tighten or close down the area between the rotating drum and the impact bars. The machine has all-wheel steering and incorporates the same-size tires both front and rear for maximum tractive effort.

In addition, three steering modes make the WR 2000 XL highly maneuverable. It can travel with front-axle steering, with steering in the crab mode, or with two steered axles in the “coordinate mode”. The WR 2000 XL has a surprisingly small turning radius of less than 14.7 ft.

Cutting Width 8 feet Cutting Depth 20 inches Travel Drive hydraulic, all wheel Travel Speed 0 - 656 fpm Shipping Weight 49,080 lbs Horse Power 422 Number of Wheels 4 Milling Drum Drive Direct Drive with V-Belt Options Water/Emulsion/Foam Injection